Vinyl Semi-Privacy Fencing

Weatherables® semi-privacy fence panel kits include the rails, pickets, and assembly components needed to build one fence panel. Posts, post caps, and Fast2K concrete alternative are sold separately unless otherwise stated on the product page.

Semi-privacy fence panels and gate kits do not include posts. Posts are sold separately so you can purchase the appropriate line, corner, end, or gate posts needed for your fence layout.

Total cost depends on the number of panels, posts, gates, and hardware needed for the full run — not just the per-panel price. 

Picket and railing spacing varies by fence style. Refer to the product specifications for exact spacing measurements and to determine whether the fence meets local code requirements. Spacing is approximately ⅞ inches on our Semi-privacy fences.

Yes. Weatherables® semi-privacy fence systems are designed for DIY installation and include detailed installation instructions.

Yes. Installation instructions are available online and can be accessed through the product page or our installation resources section.

This depends on the panel's mounting method and the deck's structural rating. Surface-mount brackets are typically required rather than in-ground posts, and the deck must be rated to handle the added load.

Weatherables® semi-privacy panels are engineered for a specific orientation, and installing them differently than designed can affect structural integrity and appearance. Check with the product's installation instructions before deviating from the standard layout.

Yes. Many semi-privacy fence systems can be installed using either a stepped or racked installation method, depending on the product and site conditions. Please refer to the style overview on the website for details.

Our fence systems are designed for the rails to lock into routed posts. If using existing posts, you will need to cut the rail lengths shorter and use mounting hardware, which will need to be purchased separately.

Panels can be cut down in width but semi-privacy fencing has such small spacing it is possible you will need to cut at a picket hole leaving a larger gap than expected.

This will depend on the mount you are using and you should contact us for further details.

Post pricing depends on the length of run, spacing, and whether corner/end posts are needed versus line posts. Check the product page or contact support for a run-specific breakdown.

Weatherables® semi-privacy fence panels can be cut to accommodate shorter fence widths. Refer to the specific product's installation instructions for modification guidelines.

No. The posts are routed for specific dimensions. If you need a shorter fence please reach out for options.

Available heights vary by product line and color. Please refer to the style overview on the website to see if a shorter or taller version of the same style is offered.

Yes. Our vinyl fencing is manufactured with UV inhibitors designed to help resist fading, discoloration, and weathering.

Gate kits include the gate panel and installation hardware. You still need to separately order posts to hinge and latch your gates to.

No. Gate posts need to be purchased separately and must be selected based on the gate size and application.

Gate size varies by product line. Please refer to the style overview on the website for alternate width/height options matching your fence style and color. 

We do not recommend painting vinyl fencing products. That will void your warranty.

See your selected semi-privacy fence style for available colors.

Our vinyl fence products are glossy.

Our vinyl fencing contains UV inhibitors that help minimize fading and maintain appearance for years. Your warranty does cover excessive fade over time. Please refer to your warranty for additional information.

Weatherables® vinyl fencing is manufactured in Ohio using durable, low-maintenance materials designed for long-term outdoor performance.

Our semi-privacy fencing is made from high-quality vinyl engineered to resist rot, warping, cracking, insect damage, and weather-related deterioration. Additionally, our vinyl products are made out of 85% recycled materials.